MiniSKY hydraulic cable blowing machines is a machine used to blow fiber optic cables into HDPE pipes. MiniSKY cable blowing machine... Περισσότερα
MiniSKY hydraulic cable blowing machines is a machine used to blow fiber optic cables into HDPE pipes.
MiniSKY cable blowing machine performs blowing of fiber cables between 2.5 mm and 16 mm.
Hydraulic MiniSKY cable blowing machine contains a single Hydraulic motor. It works by hydraulic power unit. The incoming hydraulic power from the power unit, engine and the belt system directly, causing the belts to rotate.
The recommended minimum amount of air is 12 bar and 1m ^ 3 (this amount decreases or increases depending on the Cable and Pipe diameter) and is compatible with all air compressors. Necessary connection accessories are provided with the machine.
• Forward – Backward direction valve.
• Quick and easy change belt system.
• Mechanical yardage meter that is resistant to rough weather conditions.
• Different belt sizes for cables of different diameters.
• Bi-directional (Forward-Backward) directed propulsion.
• Air compressor coupling.
• Fiber optic cable pads for different diameters (from 2.5mm to 16mm)
• HDPE pipe connectors for different diameters (from 8mm to 63mm)
• Special gear system
• Semi-automatic belt press system
• Pipe pressure manometer.
• Quick connection elements.
• Optionally interchangeable pipe apparatuses of different diameters.
• Safety protection cap
| Pushing Force: | 0 – 300 N |
| Pushing Speed: | 0 – 150 m/min |
| Cable Size : | 2,5 – 16 mm |
| Duct Size : | 8 – 63 mm |
| Drive Motor : | Air |
| Air consumption per recommended minimum pipe diameter (at 12Bar): | |
| 0 – 8mm : | 1m³/min 40-50 CFM |
| From 8 to 12mm: | 2m³/min 100-120 CFM |
| From 12mm to 16mm : | 3m³/min 150 CFM |
| From 16mm to 20mm : | 4m³/min 200 CFM |
| From 20mm to 32mm : | 5-6m³/min 300 CFM |
